top of page
Writer's pictureWeSki Cocktail Company

How to Race Wax Your Skis w/o an Iron: Scanglide Nanoglider MT, CT, XCT

Racing ScanGlide Application:

1. Carefully clean the base with the ScanGlide Wax Remover and brush with a fine steel brush while the ski base is still wet.

2. Wipe with fiber cloth until the base is free of any residues of previous products and ScanGlide Wax Remover.

3. Apply the ScanGlide Nanoglider XCT, Base X, or XCT-2X to a thin layer and allow it to dry. If any product is left on the base, wipe it off with clean fiber cloth.

4. Polish with clean fiber cloth.

5. Brush carefully with Nylon brush / roto brush. Repeat points 3 - 5 once.

6. Apply today's Nanoglider, MT, CT, XCT or XR to a thin layer and let it dry. If any product is left on the base, wipe it off with clean fiber cloth.

7. Polish the base with clean fiber cloth.

8. Brush carefully with Nylon brush / roto brush.

9. Leave to harden for 5-10 minutes.



15 views0 comments

Recent Posts

See All

Commenti


bottom of page